AOpen 4-Port 10/100Mbps Ethernet Broadband Router Manuel d'utilisateur télécharger pdf (Page 25)

EE400-R GigaFast Ethernet.

P 24

3.2 Telnet/Console Configuration

The telnet-based configuration is almost the same as console configuration. The difference is that

console configuration requires being connected to the EE400-R with your computer by null modem

cable (Please refer to Apendix C-2). Telnet configuration can only be used via Lan.

The terminal parameters should be set to 115200 8-N-1(baud rate 115200, 8 data bit, No parity, 1 stop

bit). When the RDY LED is blinking regularly, press the Enter key once.

Click Start and select Run… Type “telnet” and when the window opens, type “open 192.168.8.1”.

In general, the Telnet/console configuration is menu-driven.

Enter the password (“admin” is the default) and press Enter to login. The main menu is shown below.

pe the number of each item to select

our choice.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 53 54

Pas de commentaire

AOpen 4-Port 10/100Mbps Ethernet Broadband Router Manuel d'utilisateur Page 25